Hand Tools
Brand: TORK CRAFT
MPN: TCCP030
TorkCraft - Chassis Screw Sheet Metal Punch
Size: 30 mm
Application:
The Tork Craft Chassis Screw Sheet Metal Punch is a hand tool used to punch a
hole through sheet metal. It is a very simple tool that consists of a punch, die
and screw.
To set up the punch, first drill a pilot hole into a piece of sheet metal with a
step drill bit, place the die over the draw stud before inserting the stud
through the pilot hole. The punch is then threaded onto the tip of the dra..
N$ 351.56
Ex VAT:N$ 305.70
Brand: TORK CRAFT
MPN: TCCP032
CHASSIS - SCREW - SHEET METAL PUNCH 32MM....
N$ 461.66
Ex VAT:N$ 401.44
Brand: TORK CRAFT
MPN: TCCP035
TorkCraft - Chassis Screw Sheet Metal Punch
Size: 35 mm
Application:
The Tork Craft Chassis Screw Sheet Metal Punch is a hand tool used to punch a
hole through sheet metal. It is a very simple tool that consists of a punch, die
and screw.
To set up the punch, first drill a pilot hole into a piece of sheet metal with a
step drill bit, place the die over the draw stud before inserting the stud
through the pilot hole. The punch is then threaded onto the tip of the dra..
N$ 538.37
Ex VAT:N$ 468.15
Brand: TORK CRAFT
MPN: TCCP038
TorkCraft - Chassis Screw Sheet Metal Punch
Size: 38 mm
Application:
The Tork Craft Chassis Screw Sheet Metal Punch is a hand tool used to punch a
hole through sheet metal. It is a very simple tool that consists of a punch, die
and screw.
To set up the punch, first drill a pilot hole into a piece of sheet metal with a
step drill bit, place the die over the draw stud before inserting the stud
through the pilot hole. The punch is then threaded onto the tip of the dra..
N$ 580.98
Ex VAT:N$ 505.20
Brand: TORK CRAFT
MPN: TCCP040
TorkCraft - Chassis Screw Sheet Metal Punch
Size: 40 mm
Application:
The Tork Craft Chassis Screw Sheet Metal Punch is a hand tool used to punch a
hole through sheet metal. It is a very simple tool that consists of a punch, die
and screw.
To set up the punch, first drill a pilot hole into a piece of sheet metal with a
step drill bit, place the die over the draw stud before inserting the stud
through the pilot hole. The punch is then threaded onto the tip of the dra..
N$ 586.90
Ex VAT:N$ 510.35
Brand: TORK CRAFT
MPN: TCCP050
TorkCraft - Chassis Screw Sheet Metal Punch
Size: 50 mm
Application:
The Tork Craft Chassis Screw Sheet Metal Punch is a hand tool used to punch a
hole through sheet metal. It is a very simple tool that consists of a punch, die
and screw.
To set up the punch, first drill a pilot hole into a piece of sheet metal with a
step drill bit, place the die over the draw stud before inserting the stud
through the pilot hole. The punch is then threaded onto the tip of the dra..
N$ 744.91
Ex VAT:N$ 647.75
Brand: TORK CRAFT
MPN: TCCP054
TorkCraft - Chassis Screw Sheet Metal Punch
Size: 54 mm
Application:
The Tork Craft Chassis Screw Sheet Metal Punch is a hand tool used to punch a
hole through sheet metal. It is a very simple tool that consists of a punch, die
and screw.
To set up the punch, first drill a pilot hole into a piece of sheet metal with a
step drill bit, place the die over the draw stud before inserting the stud
through the pilot hole. The punch is then threaded onto the tip of the dra..
N$ 763.43
Ex VAT:N$ 663.85
Brand: TORK CRAFT
MPN: TCGC001
TorkCraft - Glass Cutter
Glass Breaker Slots: 2 / 3 / 4 mm
Carded Pack: Qty 1
Application:
For the scoring of glass/mirror surfaces in order to create a clean break
Tungsten Carbide wheel for long life
2/3/4mm glass breaker slot for smaller or close-to-the-edge cuts.
For Smaller Glass / Mirror
TIP: Use cutting fluid for better results. (Paraffin
works well) Use a flat, soft support as a base. Cuts regular, annealed glass.
WARNING: Using any tool can be..
N$ 83.09
Ex VAT:N$ 72.25
Brand: TORK CRAFT
MPN: TCGG04001
HYDRAULIC 3 JAW COUPLER 1/8' BLISTER....
N$ 118.68
Ex VAT:N$ 103.20
